|
PDR Mounts Heavy Duty Tilting Mount for 23" to 37" Flat Panels | 
 enlarge | Brand: PDR Mounts
Category: CE
Buy New: $89.99
Avg. Customer Rating:  70 reviews
Color: Matte Black
Media: Electronics
Size: 23" to 37"
Shipping Weight (lbs): 12
Dimensions (in): 25.3 x 8.3 x 1.6
MPN: PDR2337T
Model: PDR2337T
UPC: 689076393263
EAN: 0689076393263
Shipping: Eligible for Super Saver Shipping
Availability: Usually ships in 24 hours
|
| Features:
| • | American made signature quality for lifetime satisfaction patented ez touch 0 to 15 tilt technology smooth ergonomic tri grip tilt locking knob provides optimal grip n torque tool-free fingertip adjustment | | • | Rated easiest to install by professional A/V installers and consumers creatively designed to provide lateral side to side positioning in those installations where stud locations may be inconvenient with rugged gauge construction | | • | Consumer friendly feature designs simplest tilt mechanism on the market slim 2 5/8 inch wall profile combines with a tough matte black powdercoat finish to provide a discreet setting while offering optimal tilt capability | | • | Rugged 1/8 inch gauge steel construction guarantees reliability & peace of mind 200 lb rated capacity successfully load tested at 5X rating with the most comprehensive manufacturer's lifetime warranty in the market | | • | Universal mount design assures optimal fit to the consumer's display choice & a full hardware kit guarantees maximum installation and mounting flexibility a locking bar is included for ultimate security padlock not included |
|
| Similar Items:
|
| Editorial Reviews:
Amazon.com Product Description
The PDR 2337T Heavy-Duty Tilting Mount boasts up to 15 of tilt for 23"-27" televisions. Its matte black powdercoat finish and a slim profile blend seamlessly into your TV. Easily installed and simple to adjust, the rugged steel construction provides an impressive 200-pound load rating. A lockable security bar ensures the safety of your investment. All necessary mounting hardware and instructions are included.
|
| Customer Reviews: Read 65 more reviews...
 Solid made in America construction September 18, 2007
18 out of 18 found this review helpful
I finally took the plunge to by a new HD TV. I decided on the Samsung LNT4065F 40" 1080p LCD HDTV (~35 pounds). I bought this mount because I have to locate the TV above my existing desk, so I needed the ability to either have it against the wall, or extended out in front of the desk. Installation was a breeze, I did it myself although you should really have two people (one to hold the mount, the other to screw the lag bolt in the stud). I was able to find the manual for this online before I bought it to verify all the dimensions.
PDR Mounts actually received my rebate form and actually called me to see if I was happy with the product. This is a refreshing difference from most rebate forms! Usually most companies may or may not send you a check back and I've never got a call back before. PDR went above and beyond most companies in this respect.
Minor (very minor) annoyance: When I went to level it, I found that the front mounting bracket frame was maybe 2-5 degrees tilted vs. the wall mount piece. So I ended up leveling in in reference to the front mounting bracket instead of the wall mount piece so the TV is perfectly level now.
--- Update! ---
I just received the rebate check. This is amazing, since I received in just about 2 weeks. Never received a rebate so fast.
GREAT Customer Support! August 29, 2007
14 out of 14 found this review helpful
I just finished a call to PDR for technical support regarding the installation of my 3760T mount (their website address is on the product). Not only was I impressed with the quick response to my initial call, but also with the fact that the rep was familiar with the 42" Hitachi plasma television that I also purchased from Amazon. More about the plasma mounting receiver on the television than the 3760T mount (the mounting instruction pamphlet is pretty straightforward if you are thinking about installing it yourself), his answer and suggestions gave me the confidence to continue with my own installation. At the end of our conversation he even reminded me to avail myself of the rebate - which I had forgotten about completely! It's really nice to know that there are still companies who believe in their products enough that they will go the extra yard to make you a believer too. Thanks!!!
Simple, Adjustable, Effective - Solid Steel! August 31, 2007
10 out of 10 found this review helpful
This articulating mount was worth the investment! We purchased a Pioneer PDP-4270HD 42" Plasma and needed a mount. Considering we have a smaller living room (200 sqft) but many family members, we decided to go for an articulating mount instead of just a tilt model.
This mount was very simple to install. All hardware was included and it secured our 42" plasma safely. Surprisingly, it attached much more flush to the wall than we had thought (about 4" off the wall). There are also height adjustments that allow the TV to be mounted higher or lower (3 notches to choose from). Although we were nervous placing our very heavy plasma on something attached to the wall - it is very obvious with it's 3"+ thick steel and three large steel mounting bolts that it won't be going anywhere.
If we use our fingertips to give a gentle nudge or pull on the bottom of the TV, we can adjust it to where we want it (to the left or right). I've even moved it so that it faces another room (90 degree turn) and it's been very secure. Tilting it up and down can be done but it's a bit harder because you will need to tighten 2 knobs on either side once you've adjusted it to where you want it to be. To us this was not an issue (we like the angle of the screen set at one position anyway).
The company for this product has been very reliable with customer service. We called before our purchase and were immediately connected to not only a *live* but also a product-informed US-based tech who gave us good advice and suggestions. We've even recieved a follow-up call to see how it's worked.
Overall, an excellent experience and we're so pleased that we went with this American company and this particular mounting option.
Very Sturdy, Easy To Install, Superior Customer Service December 19, 2007
10 out of 10 found this review helpful
I purchased this wall bracket to hold my new 50" Panasonic HDTV to the living room wall. A very well-made item, forged with heavy gauge steel, with a quite attractive finish. Hardest part was locating the studs behind my plaster walls, but eventually pulled it off after drilling some exploratory holes. You want to get the four lag bolts into the center of the studs and tighten down, but don't do what I did: I put too much torque on one bolt and tore the head right off! (yes, Virginia, there is a thing known as "too tight"). This was most likely due to using an extension on my socket wrench, which permitted me to really crank down on the sucker. Not a big deal really, as I simply drilled another hole nearby and ran another bolt through it (which, of course, I bought at a hardware store - the bracket does not come with spare lag bolts). After installation, I hung off of the bracket and it took my weight with not so much as a shimmy. My brand-spankin' new TV went on the wall nicely and is the envy of all that see it. Even better, PDR called me after getting my rebate paperwork and said the check was on its way, which I received about five days after mailing the forms in. Nice.
Do yourself a favor and get this wall bracket. It tilts as well, an added plus. You won't be disappointed. Last word of advice: do as others have suggested and connect all your cables to the back of the set before placing it on the bracket. Though you may be able to attach cables with the TV hung, your life will be infinitely more difficult this way. Some have suggested that the bracket be designed to tilt up as well, to allow for cable / wire installation while wall mounted. A good idea.
Very strong Mount for my sony 40" LCd TV June 17, 2007
9 out of 9 found this review helpful
I purchased this from Amazon to use with my new Sony 40" LCD TV. It was extremely strong and well designed for wall mounting my set. It is American made in Corona CA by Davis PDR Mounts Co.
It was necessary to contact them because the Sony KDL-40V2500 does not have a flat back, but has bolt heads sticking out on the back. Luckily The mount came with spacers for mounting the bracket above and below the interfering Bolt heads, and by using them I was able to mount the set easily, just like a picture frame. The bracket also came with a locking bar which prevent removal or theft.
The standard bracket from Sony was about $350 dollars, so this was a better way to go at $80.
Highly recommended.
|
|
|
|
Powered by Search-Save.com
| |
